Using the appearance ip ospf interface Command
The appearance ip ospf interface command displays all interface-related OSPF information.
Data is displayed about OSPF advice for all interfaces or for defined interfaces:
Corp#sh ip ospf interface f0/1
FastEthernet0/1 is up, band agreement is up
Internet Abode 10.1.1.1/24, Area 0
Process ID 132, Router ID 10.1.5.1, Arrangement Type BROADCAST, Cost: 1
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 10.1.5.1, Interface abode 10.1.1.1
No advancement appointed router on this network
Timer intervals configured, Accost 10, Asleep 40, Wait 40, Retransmit 5
oob-resync abeyance 40
Hello due in 00:00:01
Supports Link-local Signaling (LLS)
Index 1/1, flood chain breadth 0
Next 0x0(0)/0x0(0)
Last flood browse breadth is 0, best is 0
Last flood browse time is 0 msec, best is 0 msec
Neighbor Calculation is 0, Adjacent acquaintance calculation is 0
Suppress accost for 0 neighbor(s)
The advice displayed by this command includes the following:
Interface IP address
Area assignment
Process ID
Router ID
Arrangement type
Cost
Priority
DR/BDR acclamation advice (if applicable)
Accost and asleep timer intervals
Adjacent acquaintance information
The acumen I acclimated the appearance ip ospf interface f0/1 command is because I knew that
there would be a appointed router adopted on the FastEthernet advertisement multiaccess network.