show interface
To verify the IP address set on a switch, you can use the show interface command. Here is
the output:
S1#sh int vlan 1
Vlan1 is up, line protocol is up
Hardware is EtherSVI, address is 001b.2b55.7540 (bia 001b.2b55.7540)
Internet address is 192.168.10.17/28
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set, reliability 255/255, txload 1/255,
rxload 1/255
[output cut]