Verifying an H.323 Gateway
Use the show gateway command to verify that an H.323 gateway is operational and to
display the current status of the gateway.
Example 5-5 shows a sample report that appears when a gateway is not registered with a
gatekeeper.
Example 5-5 show gateway Command with an Unregistered Gateway
Router#show gateway
H.323 ITU-T Version: 4.0 H323 Stack Version: 0.1
H.323 service is up
This gateway is not registered to any gatekeeper
Alias list (CLI configured) is empty
Alias list (last RCF) is empty
Example 5-6 shows a sample report that indicates an E.164 address has been assigned to
the gateway.
Example 5-6 show gateway Command with a Registered Gateway
Chapter 5: Examining VoIP Gateways and Gateway Control Protocols 275
Router#show gateway
Gateway gateway1 is registered to Gatekeeper gk1
Gateway alias list
H323-ID gateway1
H323 resource thresholding is Enabled and Active
H323 resource threshold values:
DSP: Low threshold 60, High threshold 70
DS0: Low threshold 60, High threshold 70