The Animate Port
The primary apparatus for talking to a PIX is via the animate port. Some
devices accept the old DB9 connectors—nine-pin D-subminiature connectors
similar to those begin on the aback of abounding PCs.The newer accessories use the
Cisco accepted RJ45 connector, agnate to those begin on their routers and
switches. In anniversary case, an adapted cable is provided with your equipment.
The advice is via null-modem and uses communications set to
8-N-1. If you are application Windows, a acceptable affairs to acquaint with a PIX
is Hyperterm, which is provided with best Windows-based installations, under
Accessories/Communications.When ablution Hyperterm, configure your
connection to direct-connect to COM 1, as apparent in Figure 2.5.
www.syngress.com
64 Chapter 2 • Introduction to PIX Firewalls
The communications ambit again charge to be set, as apparent in Figure 2.6.
www.syngress.com
Figure 2.5 Configuring Hyperterm
Figure 2.6 Anchorage Advice Properties for Hyperterm
Introduction to PIX Firewalls • Chapter 2 65
At this point, you should be connected. Power on your PIX, and you will see
the cossack action demography place, as apparent in Figure 2.7.Your achievement will differ
slightly.
Figure 2.7 shows an earlier beam version, but they all are similar. If you do not
see achievement or the achievement is garbled, it usually agency your ambit are not set
correctly. If you are not application the provided cable, accomplish abiding it is null-modem and
that your ambit are set as apparent in Figure 2.6.