SCCP Agreement Commands for Added Media Resources
Configuring added media assets includes the SCCP agreement that will be used
to annals with Cisco Unified Communications Manager. Global agreement includes
the agreement of the alone Cisco Unified Communications Managers, the local
SCCP interface acclimated for signaling, and activating SCCP.
SCCP Agreement Commands
Command Description
sccp ccm {ip-address | dns} To add a Cisco Unified Communications Manager server to the
identifier identifier-number account of accessible servers and set assorted parameters, including the
[priority priority] IP abode or Domain Name System (DNS) name, anchorage number,
[port port-number] and adaptation number, use the sccp ccm command in global
[version version_number] agreement mode. To abolish a accurate server from the list,
use the no anatomy of this command.
You can configure up to four Cisco Unified Communications
Manager servers, a primary and up to three backups, to support
DSP acreage services. To do this, use the antecedence option, with 1
being the accomplished antecedence and 4 actuality the lowest.
To add the Cisco Unified Communications Manager server to a
Cisco Unified Communications Manager group, use the associate
ccm command.
sccp bounded interface-type To baddest the bounded interface that SCCP applications (transcoding
interface-number and conferencing) use to annals with Cisco Unified
[port port-number] Communications Manager, use the sccp bounded command in global
configuration mode. To deselect the interface, use the no
form of this command. This should be either a LAN interface or
a loopback interface and needs to be attainable from Cisco
Unified Communications Manager. WAN interfaces should be
avoided. The anchorage advantage should be acclimated alone if the absence port
2000 has been afflicted on Cisco Unified Communications
Manager.
sccp To accredit the SCCP agreement and its accompanying applications
(transcoding and conferencing), use the sccp command in global
configuration mode. To attenuate the protocol, use the no anatomy of
this command.
SCCP and its accompanying applications (transcoding and conferencing)
become enabled alone if DSP assets for these applications are
configured, DSP-farm account is enabled, and the Cisco Unified
Communications Manager allotment action is completed.
The no anatomy of this command disables SCCP and its applications
by unregistering from the alive Cisco Unified
Communications Manager, bottomward absolute connections, and
freeing allocated resources.
After globally configuring SCCP, you charge to actualize an SCCP group. An SCCP accumulation references
previously configured Cisco Unified Communications Managers and again associates
a DSP contour with the group. To bind an SCCP accumulation to a bounded interface, use the
bind interface command. Table 2-19 describes these SCCP accumulation configuration
commands.