Configuring Conferencing and Transcoding on Articulation Gateways
The agreement of transcoding and conferencing on a articulation aperture involves DSP
resource requirements, Skinny Client Control Protocol (SCCP) configuration, DSP farm
and DSP acreage contour configuration, and accouterments configurations.
The basal accomplish for configuring conferencing and transcoding on articulation aperture routers
are as follows:
Step 1. Actuate DSP Resource Requirements: DSPs abide either anon on a voice
network bore (such as the NM-HD-2VE), on PVDM2s that are installed in
a articulation arrangement bore (such as the NM-HDV2), or on PVDM2s that are
installed anon assimilate the motherboard (such as on the Cisco 2800 and 3800
Series articulation aperture routers). You charge actuate the cardinal of PVDM2s or
network modules appropriate to abutment your conferencing and transcoding
services and install the modules on your router.
Step 2. Enable SCCP: The Cisco IOS router absolute DSP assets communications
with Cisco Unified Communications Manager application the SCCP.
Therefore, SCCP needs to be enabled and configured on the router.
Step 3. Configure Enhanced Conferencing and Transcoding: Configuring conferencing
and transcoding on the articulation aperture includes the afterward substeps:
■ Enable DSP acreage services.
■ Configure a DSP acreage profile.
■ Associate a DSP Acreage Contour to a Cisco Unified Communications
Manager Group.
■ Verify DSP Acreage configuration.
The butt of this area explores DSP acreage agreement tasks, including both
Cisco IOS agreement and Cisco Unified Communications Manager configuration.
Examples are provided for anniversary agreement task.