Conference Bridge Configuration
Parameter Value Description
Conference Bridge Name CFBRouter2 This needs to match the name previously configured
in the associate profile command on the
gateway.
Description CFBRouter2 Choose a meaningful description.
Device Pool Default Select the correct device pool.
Location <> Select the correct location.
112 Authorized Self-Study Guide: Cisco Voice over IP (CVOICE)
Select Cisco IOS Enhanced Conference Bridge for PVDM2-based deployments.
Note For simplicity, the device pool and location are left at their defaults.
Specifying Conference Bridge Parameters
To add a transcoding resource, navigate to the Service, Media Resource, Transcoder
menu option. Because PVDM2s are also used for transcoding, select Cisco IOS
Enhanced Media Termination Point as the Transcoder Type. After you select the correct
type, specify the parameters as described in Table 2-15 and illustrated in Figure 2-23.