Transcoder Configuration
Parameter Value Description
Transcoder Name XCODERouter1 This needs to match the name previously
configured in the associate profile command
on the Router1 gateway.
Description XCODERouter1 Choose a meaningful description.
Device Pool Default Select the correct device pool.
Location <> Select the correct location.
Special Load Information N/A This should be left blank.
Chapter 2: Considering VoIP Design Elements 113
Bridge name needs to match the name used in the SCCP group configuration.
Note For simplicity, the device pool and location are left at their defaults.
Select Cisco IOS Enhanced Media
Termination Point for PVDM2-based deployments.
Device name needs to match the name
used in the SCCP group configuration.
Specifying Transcoder Parameters