Changing NTP Synchronization Periods
Problem
You want to adjust how often routers send NTP packets to verify clock synchronization.
Solution
NTP does not allow poll rates to be changed manually; however, there are algorithms that adaptively shape this parameter within the NTP protocol.
Discussion
NTP is an extremely efficient protocol that actively monitors all aspects of network timing to adjust its configuration accordingly. Upon initialization of NTP on a router, it sets its poll cycle to about once every 64 seconds. As the local clock becomes synchronized and stable, the router will adaptively back off the poll cycle to a maximum of 1,024 seconds (roughly 17 minutes):
Router>show ntp associations
address ref clock st when poll reach delay offset disp
*~172.25.1.1 130.207.244.240 2 440 1024 377 1.6 -3.23 5.6
+~172.25.1.3 204.152.184.72 2 829 1024 377 1.7 8.06 0.9
* master (synced), # master (unsynced), + selected, - candidate, ~ configured
Router>
Notice that the poll cycle for the two configured servers above has been throttled back to 1024 seconds. This indicates that the router is in a stable network and the time services are consistently accurate. This also illustrates NTP's remarkable efficiency.