Adding Users to CiscoWorks

Adding Users to CiscoWorks

Adding users to the CiscoWorks system is straightforward. To add a new user to the CiscoWorks2000 system:

1. Open the Server Configuration tab in the right side panel of the CiscoWorks interface.

2. Select Setup and then Security, as shown in Figure 10.7.

   
   Figure 10.7: CiscoWorks Server Configuration Add User

3. Select the Add Users option.

4. Enter values for the setting listed in Table 10.4 and shown in Figure 10.8.

   
   Figure 10.8: The CiscoWorks2000 Add User Web Page

   Table 10.4: CiscoWorks "Add Users" Information

   CiscoWorks2000 "Add Users" Setting	Information
   Username	Name of new user account to add
   Local Password	Account password
   Confirm Password	Password confirmation
   E-mail	User's e-mail address (optional)
   CCO Login	User's CCO login account name (optional)
   CCO Password	User's CCO login account password (optional)
   Confirm Password(optional)	CCO Password confirmation
   Proxy Login	User's proxy server login name (optional)
   Proxy Password	User's proxy server password (optional)
   Confirm Password	Proxy password confirmation (optional)

The IDS MC

If the IDS MC installation is successful, an entry for the Management Center will appear. Selecting the Management Center entry will prompt the IDS Sensors entry to appear. Selecting the IDS Sensors entry brings up the Management Center IDS Sensors interface, shown in Figure 10.9.

Figure 10.9: The Management Center for IDS Sensors Page

The Devices tab of this page allows for the definition of sensor groups as well as the addition or deletion of sensors from the system as described in the next section