Troubleshooting Steps
Before working through some of the common scenarios, it will be helpful for you to examine the syslog messages that are shown on the secondary FWSM after you enable logging on as shown in Example 4-24.
Example 4-24. Syslog on the Secondary FWSM
FWSM(config)# logging on
FWSM(config)# logging monitor 7
FWSM(config)# logging console 7
FWSM(config)# 111008: User 'enable_15' executed the 'logging con 7' command.
Detected an Active mate. Switching to Standby
Switching to Standby.
FWSM(config)#
Beginning configuration replication from mate.
This unit is in syncing state. 'failover' command will not be effective at this time
End configuration replication from mate.
709006: (Secondary) End Configuration Replication (STB)
Access Rules Download Complete: Memory Utilization < 1%
105003: (Secondary) Monitoring on interface 2 waiting
105003: (Secondary) Monitoring on interface 1 waiting
105004: (Secondary) Monitoring on interface 2 normal
105004: (Secondary) Monitoring on interface 1 normal
FWSM# |