Debugging OSPF
Problem
OSPF is not behaving properly, and you want to debug it to isolate and solve the problem.
Solution
There are several OSPF debugging options. But usually, if there is an OSPF problem, you will see it as instabilities in the neighbor relationships. So the most useful debugging option traces the formation of adjacencies.
Router3#debug ip ospf adj
OSPF adjacency events debugging is on
Router3#
Discussion
This particular debug output is particularly useful because it helps to diagnose problems when routers fail to form adjacencies with one another. For example, the following debug message indicates that there is an authentication problem. The neighbor router in this case is configured for MD5 authentication, while this router is configured for no authentication.
Dec 21 16:00:14.341: OSPF: Rcv pkt from 172.25.1.7, FastEthernet0/0.1 : Mismatch Authentication type. Input packet specified type 2, we use type 0
