Configuring Syslog Messages at the Console
Configuring logging on the console interface is useful when you are troubleshooting or
observing traffic patterns directly from a Security Appliance. This gives you real-time
information about what is happening on the Security Appliance. To configure logging at the
Security Appliance console interface, use the logging console command as follows. After
logging into configuration mode, enter the following:
Pixfw(config)#logging on
Pixfw(config)#logging console 5
The 5 indicates the logging level. In this case, it is logging notification. From the console, you
can see the logs in real time.