TFTP an IPS Image
PIXfirewall(config)# hw-module module 1 recover configure
Image URL [tftp://0.0.0.0/]: tftp://192.168.10.3/AIP-SSM-K9-sys-1.1-a-5.0-0.22.img
Port IP Address [0.0.0.0]:
VLAN ID [0]:
Gateway IP Address [0.0.0]:
Once you have defined the TFTP server and IPS image, you must download and load the new
image onto the AIP-SSM and reboot the module. Use the hw-module 1 recover boot
command to start this process. This will download the image from the defined TFTP server
and then attempt to boot and initialize the AIP-SSM module with the new image. You can
view the process in detail by using the module-boot debug command preceding the hwmodule
1 recover boot command, as shown in Example 19-10.