sensor# setup
--- System Configuration Dialog ---
Current Configuration:
service host
network-settings
host-ip 10.1.9.201/24,10.1.9.1
host-name sensor
telnet-option disabled
ftp-timeout 300
login-banner-text
exit
time-zone-settings
offset 0
standard-time-zone-name UTC
exit
summertime-option disabled
ntp-option disabled
exit
service web-server
port 443
exit
………….
Continue with configuration dialog?[yes]:
Enter host name[sensor]: sensor1
Enter IP interface[192.168.10.31/24,192.168.10.1]: 192.168.10.41/24,198.168.10.1
Enter telnet-server status[disabled]:
Enter web-server port[443]:
Modify current access list?[no]: yes
Current access list entries:
No entries
Permit: 192.168.10.0/24
Permit:
………….
[0] Go to the command prompt without saving this config.
[1] Return back to the setup without saving this config.
[2] Save this configuration and exit setup.
Enter your selection[2]: 2
Warning: Reboot is required before the configuration change will take effect
Configuration Saved.
Warning: The node must be rebooted for the changes to go into effect.
Continue with reboot? [yes]: yes