When SUA is enabled, static credentials included in the local configuration of the Easy VPN
Remote device are ignored. A connection request is initiated as soon as any Hypertext
Transfer Protocol (HTTP) request is sent from the remote network to the network protected
by the Easy VPN Remote Server. All other traffic to the network protected by the Easy VPN
Server is dropped until a VPN tunnel is established.
Before a VPN tunnel is established, any HTTP request to the network protected by the Easy
VPN Server is redirected to a Uniform Resource Locator (URL) in the following format:
https://
inside-ip-address is the inside (protected) interface of the Easy VPN Remote device. For
instance, if the inside interface of the Easy VPN Remote device is 10.10.10.1, the requests
will be redirected to the following URL:
https://10.10.10.1/vpnclient/connstatus.html
You can check the status of the VPN tunnel by manually entering this URL into your browser
(from one of the remote protected hosts). This URL displays a page containing a Connect
NOTE You also can initiate a connection request from the command-line interface (CLI)
of the Easy VPN Remote device.