Audio Tuning Wizard
On the next screen, shown in Figure 2-6, you choose the appropriate devices from the drop-down lists and click Next.
Figure 2-6. Select Audio Devices
Figure 2-7 shows the Adjust the Listening Volume screen. Click Play and follow the onscreen instructions to adjust the listening volume. Click Next to continue.
Figure 2-7. Adjust the Listening Volume
Figure 2-8 shows the Adjust the Microphone Volume screen. Click the Test button and follow the onscreen instructions to adjust the microphone volume, and then click Next.
Figure 2-8. Adjust the Microphone Volume
After this you will have completed the Audio Tuning Wizard. The final screen now appears, as shown in Figure 2-9.
Figure 2-9. Complete the Audio Tuning Wizard
Click Finish to close the wizard and open the Preferences window. The Preferences window is shown in Figure 2-10.
Figure 2-10. Preferences Window
In the Preferences window, click the Network tab. If option 150 pointing to the Cisco Unified Communications Manager Express has been set in the DHCP profile, the Use the default TFTP servers radio button will already be selected and the IP of the TFTP server(s) will be visible, as shown in Figure 2-11.
Figure 2-11. Network Preferences – Use the Default TFTP Servers
Note
The TFTP servers must be specified manually when option 150 ip-address is not in the DHCP profile. Click Use these TFTP servers: and enter the IP address of the Cisco Unified Communications Manager Express. You must also choose the correct network adapter and device name.
Click the Audio tab. The audio properties chosen during audio tuning appear, as shown in Figure 2-12.
Figure 2-12. Audio Preferences
Click the Directories tab, as shown in Figure 2-13. Enter the Cisco Unified Communications Manager Express administrator username and password.
Figure 2-13. Directories Preferences
Click OK. Cisco IP Communicator now registers with CME.
Open Cisco IP Communicator. An application appears, as shown in Figure 2-14.