VPN Tab on ASDM
IPS Tab
The IPS tab is optional and will only be displayed if the Security Appliance has enabled IPS
sensors through the CLI. You can use the IPS tab to manage network settings and signatures
for intrusion prevention (see Figure 15-14). The IPS can configure the sensor to control
blocking devices, as well as configure several SNMP features. Additionally, you can configure
a sensor to automatically restore the sensor to factory defaults, reboot, update the software,
or shut down.
Routing Tab
The Routing tab, shown in Figure 15-15, is where a security administrator can configure the
different routing protocols for the Security Appliance. The Routing window is subdivided
into each supported routing protocol: static routes, RIP, OSPF, IGMP, and PIM. Each of these
routing protocols has the same features as can be found through the CLI configuration.