Table 11-8 rip Command Parameters
Parameter Description
if-name The name of the interface to which the RIP configuration will apply (the name
assigned in the nameif command).
default Keyword indicating that you want to broadcast the address of the specified
interface as a default route.
passive Enables passive RIP on the interface. The Security Appliance listens for RIP
routing updates and uses the information received to populate its routing table.
version Keyword used to specify the version of RIP to use. This keyword must be
followed by either 1 or 2 to indicate the RIP version to use.
authentication Keyword to enable RIP version 2 authentication.
text Keyword indicating that RIP updates should be sent in the clear.
md5 Keyword indicating that RIP updates should use MD5 authentication.
key The key to encrypt routing updates. This key is a text string of up to 16
characters.
key_id The key identification value in the range between 1 and 255. The same key ID
must be used on all of your RIP-enabled devices that communicate with one
another.