Digit Translation Tables
The ability to manipulate dialed digits is supported within Cisco Call Manager.
What this allows for is the manipulation of not only the digits themselves, but
also the number of digits within the string.This is most commonly seen in the
www.syngress.com
The Usage of H.323 Gateways
A device that is “gateway controlled” will need to successfully query the
gatekeeper in order to gain admission. The CODEC region should be set
to handle the correct CODEC and compression technique. It is allowable
to share H.323 gateways between multiple inbound and outbound calls.
Gateways that are implemented with Skinny Gateway Protocol and
MGCP are only allowed within one Cisco CallManager cluster.
Configuring & Implementing…
AVVID Dial Plans • Chapter 9 301
directing of calls that have no directly defined destination or DID number.These
calls are usually forwarded to an attendant or voice mail. As an example, if your
office uses the DID range of 0000 to 0999 and you want calls to be forwarded to
the front desk, which is defined as 0001, you can create a translation table of
0XXX with a translation mask of 0001.This will direct calls to the front desk
destination. Note:This is for DID numbers that are not defined.This also works
for hunt groups, and can be used for internal (also called on-net if within the
network) and external (also known as off-net) calls as well as for inbound and
outbound calls.