debug crypto ipsec Command Output
IPSec(key_engine): got a queue event...
IPSec(spi_response): getting spi 0xd532efbd(3576885181) for SA
from 192.168.2.1 to 192.168.1.1 for prot 3
return status is IKMP_NO_ERROR
crypto_isakmp_process_block: src 192.168.2.1, dest 192.168.1.1
OAK_QM exchange oakley_process_quick_mode: OAK_QM_AUTH_AWAIT
ISAKMP (0): Creating IPSec SAs
inbound SA from 192.168.2.1 to 192.168.1.1 (proxy 10.10.10.3 to 192.168.1.1.)
has spi 3576885181 and conn_id 2 and flags 4
outbound SA from 192.168.1.1 to 192.168.2.1 (proxy 192.168.1.1 to 10.10.10.3)
has spi 2749108168 and conn_id 1 and flags 4IPSec(key_engine): got a queue
event... IPSec(initialize_sas): ,
(key eng. msg.) dest= 192.168.1.1, src= 192.168.2.1,
dest_proxy= 192.168.1.1/0.0.0.0/0/0 (type=1),
src_proxy= 10.10.10.3/0.0.0.0/0/0 (type=1),
protocol= ESP, transform= esp-3des esp-md5-hmac ,
lifedur= 0s and 0kb,
spi= 0xd532efbd(3576885181), conn_id= 2, keysize= 0, flags= 0x4
IPSec(initialize_sas): ,
(key eng. msg.) src= 192.168.1.1, dest= 192.168.2.1,
src_proxy= 192.168.1.1/0.0.0.0/0/0 (type=1),
dest_proxy= 10.10.10.3/0.0.0.0/0/0 (type=1),
protocol= ESP, transform= esp-3des esp-md5-hmac ,
lifedur= 0s and 0kb,
spi= 0xa3dc0fc8(2749108168), conn_id= 1, keysize= 0, flags= 0x4
return status is IKMP_NO_ERROR