debug aaa accounting Command Output
PIX-Firewall# debug aaa accounting
10:15:01: AAA/ACCT: EXEC acct start, line 10
10:15:01: AAA/ACCT: Connect start, line 10, glare
10:15:01: AAA/ACCT: Connection acct stop:
task-id=70 service=exec port=10 protocol=telnet address=172.16.1.13 cmd=glare
bytes-in=308 bytes-out=76 paks-in=45 paks-out=54 elapsed-time=14
If you believe you have encountered a protocol-specific problem, you can view the individual
protocols using the following commands:
■ debug tacacs—Displays the packet information for communication between the Security
Appliance and the AAA server. Example 18-15 demonstrates typical output from this
command.
■ debug radius—Displays the output of the RADIUS communication. This is more difficult
to read, except for the obvious “Access-Accept” or “Access-Reject” message. Example
18-16 demonstrates typical output from this command.