Cluster Configuration Checklist
The following is a checklist to configure a cluster:
1. Install and configure the servers and other hardware in the
cluster.
2. Collate information required to install Cisco CallManager as
well as other applications to be installed on servers in the
cluster.
3. Decide upon the role of each server within the cluster.
4. Install Cisco CallManager as well as other software required
on the servers.
5. Configure CallManager groups to provide server failover and
redundancy.
6. Configure device pools, place devices in these pools, and
assign to a CallManager group.
7. If an inter-cluster trunk is required, install and configure it as
an H.323 device.
8. If call admission control is required for an inter-cluster trunk,
configure either a gatekeeper, or the CallManager locations
feature.