show service-policy Command Syntax (Continued)
Syntax Description
intf Specifies the interface name.
action Specifies an action for which the statistics data are to be shown.
flow
flow_description
Specifies a data flow on which policies that are enacted will be displayed,
including the following:
Protocol
host source_ip | source_ip source_mask
source_ip
source_mask
eq
source_port
destination_ip
destination_mask
destination_port
icmp
icmp_type
show service-policy Command Output
ASAfirewall(config)# show service-policy
Interface outside
Service-policy: outside1
Class-map: http1
police:
cir 64000 bps, bc 1000 bytes
conformed 0 packets, 0 bytes; actions:
transmit
exceeded 0 packets, 0 bytes; actions:
drop
conformed 0 bps, exceed 0 bps
Class-map: internet
IPS: mode inline, packet 0